THE TENTERDEN OAK PORCH KIT IN STOCK FOR IMMEDIATE DESPATCH 2.1m x 1m

Oak porch kit "The Tenterden". This porch will fit most standard doors. It is 2100mm external post width, 1000mm external post depth.

1250mm side height designed to sit on 850/900mm high walls. Our high quality oak porches are hand crafted and traditionally built to last with heavy section 150mm solid oak. This is our latest design'The Tenterden'.

It has a contemporary, airy and striking front elevation with hand cut curved jowl posts and a straight tie beam and spindles in the apex. We work traditionally and use draw dowels, so all the joints pull in tight on final installation with the use of the tapered, hardened oak pegs fully provided in the kit.

Each porch is individually handmade and will suit many styles of house. The main uprights at the front and rear are 150mm x 150mm where they meet the dwarf wall and are jointed to a solid 150mm wide x 125mm sole plate as well as 150mm square top plate timber.

Across the front elevation we use a selected large solid oak beam. The curved jowl posts give a feature entrance. The rafter timbers are also in 100 x 50mm solid oak. The front set of rafters sit in front of the principle rafter offering a slight'hood' to the porch to help keep the rain out.

We normally produce each frame in the workshop and send out photos of your kit standing before we despatch. We accommodate bespoke sizes, so let us know your measurements. We typically have a lead time of approx 6-8 weeks for these. We have a very simple pdf file available that identifies key measurements required for your build. Please ask us at FURHG 01227 490 432.

What you receive for this listing. The listing is for the hand made oak TENTERDEN style porch shown in the photos.

Our kits are designed to be simple to put together and typically the only fixing required is through the rear set of rafters into the wall. We can of course build larger as required and are happy to give you a price on this. Side height 1250mm to the top of the top plate. Our standard roof pitch is 45 degrees and the kit is designed to be placed on 850/900mm dwarf brickwork wall, giving you approx 2100mm walk in under the beam. Oak of course protects itself so there is no need to treat further, unless it is aesthetic - some customers like the oiled look.

It is important to ensure any oil used has no varnish content. We are always happy to offer advice on selecting the right design and look forward to speaking to you. We have over 30 years experience with oak within the team. All our solid oak frames are delivered with a sanded finish and in kit form for simple construction.

Please note there may be marks made to the frame in transit on leaving the workshop. We always recommend using a dilute oxalic acid solution to clean up the green oak after install. This will help with any water staining as well as ladder marks etc. Most depots are very good with this service and we have few problems.

If you require any more information we would be happy to help, please call Marty on 01227 490432 to discuss. We have a simple pdf file to guide you through the right measurements we need to build your porch to size.

We also have many more photos of our porches both in the workshop and installed. This item is in the category "Home, Furniture & DIY\DIY Materials\Doors & Door Hardware\Other Door Hardware". The seller is "furhgporches" and is located in this country: GB.

This item can be shipped to United Kingdom.

Item Diameter: 150mm
Material: Oak, Wood
Item Length: 100cm
Suitable For: Double Door, French Door, Front Entrance Door, Balcony/Terrace Door, Barn Door, Cellar Door, Patio Door, Side Entrance Door/Backdoor, Storm Door, Sliding Door
Colour: Oak
Sub-Type: Canopy with Brackets
Brand: FURHG
Type: Porch Canopies
Number in Pack: 1
Model: TENTERDEN PORCH
Style: Traditional
Features: Traditionally built
Country/Region of Manufacture: United Kingdom
Finish: Sanded
Room: Porch
Item Width: 200cm