The'Westminster' Redwood Timber Porch. Plus 2x Sandstone Staddle Stones. Thi s beautiful handmade porch, in the impressive'Westminster' design, is made from first quality redwood timber.
The porch comes as built sections and comprises 2 front posts; 1 decorative front truss; 2 wall plates; 1 ridge board; 2 rear rafters; 2 centre rafters; 2 front rafters (with stop chamfer edges); 2 corner braces. PLEASE NOTE: The canopy is designed for you to fit your own choice of roof covering. This can be done with felt, lead, slates or tiles etc.
The sections are supplied as bare timber, ready for you to paint or stain with your own choice of finish. Internal width between the front posts 2100mm. Width from outside of post to outside of post 2380mm.
Overall width (rafter tip to rafter tip) 2630mm. Post height is 2100mm (to include thickness of wall plates). Projection from wall to front of posts 1000mm, with further 200mm overhang of front rafters. Bottom of truss to apex 850mm.
Timber sizes: front posts 140mm x 140mm; front truss 145mm x 70mm. This porch is also available. Plus, included with this Porch.2x Natural Sandstone Staddle Stones. For base of porch posts. The stones are cut from natural sandstone and come pre-drilled with. Stainless steel fixing pins included.
The size of the stone is 200mm x 200mm, with bevelled edges reducing to a 150mm x 150mm pad on top. They are intended to be concreted into the ground by 100mm, leaving 200mm above ground. This item is in the category "Garden & Patio\Garden Structures & Shade\Awnings & Canopies". The seller is "shropshire-door-canopies" and is located in this country: GB.This item can be shipped to United Kingdom.