Wooden front door canopy porch

These units are approximately 1.2M (4ft) wide (inner beam to inner beam) by approximately 21" high (cross member to roof apex) and approximately 20" deep. Made from genuine 4 Oak beams.

This are not the typical skinny framed units made from cheap softwood pine that you find online, but a heavyweight and substantial structure. They are supplied planed, sanded and oiled, and without a roof covering, so all you have to do is to fit your own choice of roof covering. As long as you have sound brickwork, you can cover them with Tiles, Slates or simple felt, the choice is yours. The units are supplied already constructed with all holes plugged and sanded flush. However, if you want it deconstructed for ease of installation or transportation, drop me a line.

A mounting kit is supplied, which consists of 5 x M16 Anchor bolts and will require a 22mm drill to install (supplied at extra cost). If you are within the Norfolk area, we can deliver for free, or alternatively you can arrange for your own courier to collect. If you have a requirement for any amendments to be made, ie a narrower or wider fitting or the apex either raised or lowered, this can be easily accommodated. Just message me prior to construction with your requirements. As these are made from natural green Oak (this refers to their age not colour), they will get considerably lighter in weight once they dry out.

So do not be too concerned about the weight of these on your wall once they are installed. The only maintenance they require is a light coating of teak oil once a year, this will not only protect it from the elements, but will maintain and enhance the natural golden colour. And lastly, when you place your order, please specify whether you want straight or curved arms for the braces on the supports. Collection is possible from our Dereham Office if you want to save on costs, or you can arrange for your own courier to collect.

---